PL 110 FA

A powered enclosure loaded with a 10" woofer, the Pulsar PL 110 FA delivers remarkably assertive and low-ranging bass response yet leaves a small footprint. Rated for 1,000 watts and equipped with the latest DSP technology, it renders fullrange signals with punch and authority. Smart limiters tame spiking bass signals to ensure even the smallest PULSAR enclosures" midrange and high frequency response remains stable. The low-vibration wood housing underpins the speaker"s excellent acoustical properties to achieve greater sound pressure and a uniform sonic image. HK Audio also offers a wide range of rigging hardware, protective covers and mounting poles.

  • Amazing bass response even at high volume levels
  • Remarkably balanced sound on its own and with a sub
  • Compact dimensions
  • Impact-resistant epoxy strips to protects edges
  • Wood housing for optimum acoustics
  • Extensive DSP functions
  • Three inputs for utmost versatility
  • Optional: Rigging hardware, protective cover, mounting pole
  • Five-year warranty
  • Made in St. Wendel, Germany
Model
PL 110 FA
Max SPL128 dB@10%THD, Halfspace
Max SPL peak134 dB@10%THD, Halfspace
Max SPL calculated136 dB Halfspace
Frequency response +/- 3 dB70 Hz - 16kHz
Frequency response -10 dB58 Hz - 18kHz
Power Rating1000 W
AmplifierClass D - Biamped
Active protection circuitsUnder-voltage, thermal, short circuit, and over-current protection
ProtectionSubsonic Filter, Peak Limiter, RMS Limiter, Auto Standby
Low/Mid Speaker10" with 2" voice coil (4 ohms)
HF Driver1" with 1" voice coil (16 ohms)
Horn characteristics90┬░ x 55┬░ CD horn
Connections2 x XLR Combo In, 1x Stereo Cinch In, 2 x XLR Thru, 1 x XLR Mix Out
Input Sensitivity+4dBu @ Gain center-click
Sensitivity switchyes - Line/Mic Input A
Equalizer2 EQ switches: Stand Alone-Monitor / System & Flat / Contour
Pole mountDuo Tilt 3/7
Rigging points5 x M8
Handles1, integrated
EnclosureHybrid (MDF, particle)
Grille1 mm metal grille backed with black acoustic foam
FinishAcrylic enamel, black
Optional accessoriesCover, Tilt Unit, Rigging Yoke (Tilt Bracket)
Dimensions (WxHxD)34,3 x 49,1 x 37 cm
Weight16 kg / 35.28 lbs
AP-8
(Set of 3 x AP-8)

This attachment point has a workload limit (WLL) of 360 kg/794 lbs. It safely attaches enclosures with M8 rigging points to steel cables or chains.


PULSAR
Protective Covers

Tailored, padded covers are optionally available for all PULSAR series models. Openings afford access to the enclosures‘ carrying handles.


TB-2

This single-cab tilt bracket serves to attach the PL 110 FA to trusses using appropriate half-couplers or trigger clamps (M12). It attaches to variable positions on the recessed handles. Once the unit is aimed properly, the TB-2 is simply secured with the clamping lever.