LINEAR 3 Bass Power Pack
EVP/SRP*: €3.999,00
*empfohlener Verkaufspreis / Suggested Retail PriceThe LINEAR 3 Bass Power Pack features two LINEAR 3 115 FA cabinets, two LINEAR Sub 1800 A subwoofers, two K&M speaker poles, and four covers.
You can easily address audiences of up to 300 with this rig.
Description
If bass frequencies figure prominently in your playlists or self-produced tracks, the LINEAR 3 Bass Power Pack will serve up all the low-end oomph you need to bust out the bass. The combination of two LINEAR 3 115 FA mid/high units and two L Sub 1800 A subwoofers delivers big, bold sound across all frequency ranges. You get four EQ presets – Bass Boost, Flat (LF), Flat (HMF), and Contour – to tweak this PA’s response to purpose and get up to 300 people moving on the dance floor. And if you find yourself spinning tracks at more intimate gatherings, two LINEAR 3 mid/high units can get the party pumping in standalone mode even without added subwoofers.
• LINEAR 3 Bass Power Pack features two LINEAR 3 115 FA cabinets and two LINEAR Sub 1800 A subwoofers
• Two K&M speaker poles and four covers are included
• All components fine-tuned to match perfectly
• Total power output: 4,800 watts
• Four EQ presets
• Advanced DSP technology: you don’t need to be a sound engineer to enjoy high-end audio
• Intelligent Multiband Limiter to keep your sound sweet at every volume level
• For audiences of up to 300
Includes:
2 x LINEAR 3 115 FA
2 x L Sub 1800 A
2 x LINEAR 3 115 FA Covers
2 x Sub 1800 A Covers
2 x Speaker Poles
Techn. Data
Max. SPL @ 10% THD | 126 dB half space (58 Hz – 12 kHz averaged) |
Max. SPL peak @ 10 % THD | 135 dB half space |
Frequency response +/-3 dB | 58 Hz – 16 kHz |
Frequency response -10 dB | 49 Hz – 18 kHz |
Power amp output (peak power) | 1200 W |
Preamp | DSP (Time Alignment) |
Amp type | Class D - biamped |
Active protective circuits | Under-voltage, thermal, short circuit, over-current protection, subsonic filter, look ahead temperature control, peak, RMS and multiband limiters |
Low-/mid speaker | 1x 15", 2.5" voice coil |
HF driver | 1", 1" voice coil |
Horn directivity | 90° x 55° CD horn |
Active crossover frequency | 2.3 kHz FIR X-over with 72 dB/oct. |
Analog inputs | 2x XLR combo balanced, 1x Stereo RCA |
Analog outputs | 2x XLR Thru balanced, 1x XLR Mix Out |
Input sensitivity | +4 dBu @ Gain center-notched |
Sensitivity switch | Line/Mic Input A |
Filter presets | 2 EQ switches: Bass Boost/Flat & Flat/Contour |
Mains connector | 1x IEC socket with V-Lock cord retainer |
Power consumption | 3 A / 220-240 V (6 A / 100-120 V) nominal according to EN 60065 |
Pole mount | DuoTilt 3°/7° |
Rigging points | 4x M8 (AP-8) |
Carrying handles | 2x MultiGrip |
Housing | 16 mm MDF |
Finish | Black acrylic enamel |
Front grille | 2 mm metal grille backed with black acoustic foam |
Dimensions (WxHxD) | 44 x 69 x 44.5 cm 17-21/64 x 27-11/64 x 17-33/64" |
Weight | 27.9 kg / 61.5 lbs |
Max. SPL @ 10% THD | 130 dB half space (40 Hz – X-Over averaged) |
Max. SPL peak @ 10 % THD | 132 dB half space |
Frequency response +/-3 dB | 42 Hz – X-Over |
Frequency response -10 dB | 38 Hz – X-Over |
Power amp output (peak power) | 1200 W |
Amp type | Class D |
Active protection circuits | Undervoltage-Protection, Thermoprotection, Short-Circuit-Protection, Overcurrent-Protection, Subsonic 24 dB/oct., Peak-Limiter |
LF driver | 1x 18", 3" voice coil |
Active crossover frequency | 100 Hz / 120 Hz variable with 24 dB/oct. |
Analog inputs | 2x XLR combo balanced |
Analog outputs | 2x XLR Thru balanced, 2x XLR Mid/High Out |
Input sensitivity | +4 dBu @ Gain center-notched |
Mains connector | 1x IEC socket with V-Lock cord retainer |
Power consuption | 3 A / 220-240 V (6 A / 100-120 V) nominal according to EN 60065 |
Pole mount | 1x M20 |
Carrying handles | 2x MultiGrip |
Housing | 16 mm MDF |
Finish | Black acrylic enamel |
Front grille | 2 mm metal grille backed with black acoustic foam |
Dimensions (WxHxD) | 51 x 67 x 72 cm 20-5/64 x 26-3/8 x 28-11/32" |
Weight | 42 kg / 92.6 lbs |