LINEAR 5 Power Pack
EVP/SRP*: €4.899,00
*empfohlener Verkaufspreis / Suggested Retail PricePowered all-in-one PA system for audiences of around 350, 2x LINEAR 5 112 XA mid/ high units, 2x L SUB 2000 A subwoofers, accessories included (without wheels)
Description
LINEAR 5 Power Pack –Â THE NEW PERFORMANCE CLASS
This all-in-one sound reinforcement solution consists of two mid/ high units, two powerful bass bins and all the accessories necessary to address audiences of around 350*. With the L SUB 2000 subwoofer as part of its arsenal, the Power Pack delivers a mightier low-end punch for DJing gigs and rocking out with a full-blown band. Simply set the mid/high units” Gain/EQ switch and the subwoofers” Configuration switch – that”s all it takes to voice the system. The integrated controller”s presets do the rest.
•  Sets up quickly and is ready for use in no time at all
•  Fully active component management (gain adjustment) for utmost flexibility and utility
•  All components needed for safe operation on board and optimized to suit user needs
•  Mid/high units may be used separately
•  Factory-included accessories
Consisting of: 2 x LINEAR 5 112 XA 2 x L Sub 2000 A 2 x speaker poles 4 x protective covers Extendable to a full stack with 2 x L Sub 2000 A
|
* About the audience size: The numbers are more for orientation rather than a definite recommendation. The actual coverage will depend on the room’s size, shape, appointments and furnishings, the area that you want cover, and the desired SPL.
Techn. Data
Max. SPL @ 10% THD | 132 dB half space (55 Hz – 120 averaged) |
Max. SPL peak @ 10 % THD | 133 dB half space |
Frequency response +/-3 dB | 49 Hz – 125 Hz |
Frequency response -10 dB | 39 Hz – 160 Hz |
Power amp output (peak power) | 1200 W |
Amp type | Class D |
Active protection circuits | Undervoltage-Protection, Thermoprotection, Short-Circuit-Protection, Overcurrent-Protection, Subsonic 24 dB/oct., Peak-Limiter |
LF driver | 2x 12", 2.5" voice coil |
Active crossover frequency | 100 Hz / 120 Hz variable with 24 dB/oct. |
Analog inputs | 2x XLR combo balanced |
Analog outputs | 2x XLR Thru balanced, 2x XLR Mid/High Out |
Input sensitivity | +4 dBu @ Gain center-notched |
Mains connector | 1x IEC socket with V-Lock cord retainer |
Power consuption | 3.3 A / 220-240 V (6.6 A / 100-120 V) nominal according to EN 60065 |
Pole mount | 1x M20 |
Carrying handles | 4x MultiGrip |
Housing | Birke-Multiplex |
Finish | Black acrylic enamel |
Front grille | 2 mm metal grille backed with black acoustic foam |
Dimensions (WxHxD) | 50.6 x 80.6 x 61 cm 19-11/16 x 31-47/64 x 24-1/64" |
Weight | 46.2 kg / 101.9 lbs |
Max. SPL @ 10% THD | 128 dB half space (70 Hz – 12 kHz averaged) |
Max. SPL peak @ 10 % THD | 136 dB half space |
Frequency response +/-3 dB | 100 Hz – 12 kHz |
Frequency response -10 dB | 75 Hz – 20 kHz |
Power amp output (peak power) | 1000 W |
Amp type | Class D - biamped |
Active protective circuits | Under-voltage, thermal, short circuit, and over-current protection, Subsonic 24 dB/oct. peak limiter |
Low-/mid speaker | 1x 12", 2.5" voice coil |
HF driver | 1", 1.75" voice coil |
Horn directivity | 60° x 40° CD horn, rotatable |
Active crossover frequency | 1.65 kHz, 24 dB/Oct. |
Analog inputs | 2x XLR combo balanced |
Analog outputs | 2x XLR Thru balanced, 1x XLR Mix Out |
Input sensitivity | +4 dBu @ Gain center-notched / L5 System Level |
Sensitivity switch | Line/Mic Input A |
Filter presets | EQ switch: Flat/Monitor |
Mains connector | 1x IEC socket with V-Lock cord retainer |
Power consumption | 3 A / 230 V nominal according to EN 60065 |
Angels up (Monitor angle) | 33° |
Pole mount | DuoTilt 3°/7° |
Rigging points | 4x M8 (AP-8) |
Carrying handles | 1x SingleGrip, 1x MultiGrip |
Housing | Hybrid (birch multiplex/MDF) |
Finish | Black acrylic enamel |
Front grille | 2 mm metal grille backed with black acoustic foam |
Dimensions (WxHxD) | 37 x 66.8 x 30 cm 14-9/16 x 26-19/64 x 11-13/16" |
Weight | 21.1 kg / 46.5 lbs |
Accessories
Downloads
Linear 3 vs. Linear 5
