VR2-10810
Passive fullrange installation loudspeaker, 200 W (programm), 12 ohms impedance, 8″ low-mid and 1″ HF driver, different horn variants, 118 dB max. SPL, 84 Hz – 20 kHz (-10 dB), 2x binding posts, certified according to EN 54-24, IP 55 version optional
Description
VR2-10810 – EN 54-compliant high Performance
Professional-grade, full-range speaker system housed in a bass reflex enclosure with a passive crossover, 8″ bass/ midrange woofer and a 1″ high-frequency driver coupled to a CD horn. It is designed for use in integrated public address systems tasked to render music and speech in high audio quality and provide voice alarm in compliance with current international standards.* For the best audio results, this speaker is to be used with the presets for the Gräf & Meyer eXentro system, Lab.gruppen IPD/D series power amps or, in multiplatform systems, for the given manufacturers‘ equipment (the latter filter sets are available in downloadable spreadsheets).
Techn. Data
Power-handling nominal (RMS) | 100 W |
Power-handling, program | 200 W |
Power-handling, peak | 400 W |
Nominal impedance | 12 ohms |
Max SPL | 99 dB @ 4 m (EN 54 signal) |
Maximum SPL, @ 10% THD | 118 dB @ 1 m (full space) |
Sensitivity 1W/1m | 95 dB (full space) |
Frequency response -10 dB | 84 Hz - 20 kHz |
Low/Mid Speaker | 1 x 8" with 1.75" voice coil |
HF Driver | 1 x 1" with 1.4" voice coil |
Horn characteristics | 60° x 40°, 90° x 55°, 60° - 90° x 55° (asymmetric, all rotatable) |
Directivity | depends on horn variation |
Crossover frequency | 1.1 kHz, 2nd order |
X-Over | 2 way passive |
Connections | 2x binding post |
Filter type | Filters using Gräf & Meyer eXentro, Lab.gruppen IPD/D series or freely available spread sheets |
Rigging points | 13 x M10 |
Enclosure | Birch plywood |
Grille | Metal grille with acoustic textile (flame-retarding and dirt repellent) |
Finish | 2-component structured lacquer in over 30 colors, cabinet is painted from the in- and outside |
Optional accessories | U-bracket, tilt unit, wall plate, cluster plates and AP-10 B mounting point |
Dimensions (WxHxD) | 240 x 490 x 290 mm |
Weight | 11.7 kg / 25 lb 13 oz |