The active speaker system for the ultimate sound

Advanced DSP technology that can handle any situation with confidence.

No matter where you are or who your sound engineer is, you can achieve brilliant sound results at every performance! Thanks to its DSP filtering that is fine-tuned to listening habits, the LINEAR 3 active speaker system has you covered in a wide range of different performance conditions.

The system is easy to operate from the stage, meaning you can quickly get to grips with the acoustic conditions.

With filter presets, intelligent multiband limiting and FIR separation, you’ve got all the best prerequisites for getting the most out of your sound. High power reserves and superbly matched components make the robust LINEAR 3 speakers absolute high-end units.

And with its stylish slotted grille design, the LINEAR 3 active speaker series looks as good as it sounds.

Advanced DSP technology – Multiband limiter with filter presets

The advanced DSP technology driving LINEAR 3 has one main purpose: to make the job of musicians and DJs easier! LINEAR 3 gives you the ultimate sound in any situation. And it’s so simple to use!

An intelligent multiband limiter and filtering of the frequency response in the ‘Contour’ setting ensure a consistently sweet and assertive sound, from super quiet to really loud.

The multiband limiter monitors and controls the relevant frequency bands separately, only intervening when it is needed. HK Audio’s engineers have developed, tested and fine-tuned all the components and options offered by LINEAR 3 for all the relevant applications, working with musicians to optimise them for practical use.

As a result, LINEAR 3 guarantees an impressively effective sound experience, even for semi-professional musicians and DJs who are not dedicated PA specialists.

This gives musicians on stage more room for musical creativity and a top performance.

Simple handling and precise alignment thanks to MultiGrip and Duo Tilt

HK Audio MultiGrip

The built-in HK Audio MultiGrips make handling the speakers a breeze and ensure even more safety in every situation. They also allow for professional flying hardware to be fitted. The TB-45N or TB-45NQ tilt brackets can be mounted directly to the MultiGrips on the LINEAR 3 112 FA and LINEAR 3 115 FA models, making them ideal for professional rigging or installation. The models of the LINEAR 3 series have 4 x M8 mounting points and can be flown by mounting AP-8 attachment points, for example.

MultiGrips

DuoTilt™ 3°/7° pole mount flange

The DuoTilt™ stand mount helps to align the speaker towards the audience reliably so that it provides the best sound. The preset 3° and 7° tilt of the stand mount means you can choose the right alignment, regardless of the setup.

DuoTilt

LINEAR 3 112 FA

The active 12″/1″ full-range mid/high unit is incredibly powerful with its 1,200 watts of power. The four different EQ presets – Bass Boost, Flat (LF), Flat (HMF) and Contour – also make it suitable for a wide range of applications and offer top performance and easy handling in every situation.

LINEAR 3 112 XA

The active 12″/1″ speaker is extremely flexible thanks to its multifunctional cabinet. It is suitable for use both as a front PA with ample cabinet volume and as an assertive stage monitor.

LINEAR 3 115 FA

Compared to the 12″ version, the active 15″/1″ speaker offers even more depth with the same features. Especially in standalone use, it impresses with powerful bass and a balanced, crystal-clear sound across the entire frequency spectrum.

LINEAR SUB 1500 A

The LINEAR SUB 1500 A is a powerful 15″ active subwoofer that has been optimised for the LINEAR 3 mid/high units. What makes this sub so practical is that it is so lightweight and manageable that it can easily be transported by just one person.

LINEAR SUB 1800 A

The L SUB 1800 A active 18″ subwoofer is designed to be used with the LINEAR 3 mid/high units. It provides even more depth than the 15″ version.

The three other active LINEAR SUB subwoofers can also be combined with the LINEAR 3 mid/high units.

LINEAR SUB 1200 A

LINEAR SUB

LINEAR SUB 2000 A

LINEAR SUB

LINEAR SUB 4000 A

LINEAR SUB

System proposals

LINEAR 3 Compact Venue Pack

LINEAR 3 Compact Venue Pack

2 x LINEAR 3 112 FA2 x LINEAR SUB 1500 A
1 x Stereo Pole Add On
2 x LINEAR 3 112 FA Cover
2 X LINEAR SUB 1500 A Cover

For bands that regularly play in youth centres, small music clubs and bars and want to personally guarantee first-class sound, the LINEAR 3 Compact Venue Pack is sure to delight audiences with its superb sound. The LINEAR 3 series compact PA system can be set up and adjusted in just a few steps. Preset switches on the rear of the speakers make it quick and easy to achieve impressive sound results thanks to the intelligent DSP filter settings.

Audience size*: up to 300 people

System performance: 4,800 watts

LINEAR 3 Bass Power Pack

LINEAR 3 Bass Power Pack

2 x LINEAR 3 115 FA
2 x LINEAR SUB 1800 A
1 x Stereo Pole Add on
2 x LINEAR 3 115 FA Cover
2 x LINEAR SUB 1800 A Cover

If low frequencies feature prominently in your playlists or self-produced tracks, the L3 Bass Power Pack is just the thing for you. The combination of two L3 115 FA mid/high units and two L Sub 1800 A subwoofers delivers first-class sound performance in all frequency ranges thanks to the four different EQ presets – Bass Boost, Flat (LF), Flat (HMF), Contour.

Audience size*: up to 200-300 people

System performance: 4,800 watts

LINEAR 3 High Performance Pack

LINEAR 3 High Performance Pack

2 x LINEAR 3 112 FA
4 x LINEAR SUB 1500 A
1 x Stereo Pole Add On
2 x LINEAR 3 112 FA Cover
4 x LINEAR SUB 1500 A Cover

The powerful sound of the High Performance Pack with four subwoofers will ensure that your audience not only hears your music, but truly feels it too. The state-of-the-art DSP filtering, which allows quick adaptation to the room using the four preset combinations, makes the L3 High Performance Pack an easy-to-operate PA system that always delivers the ultimate sound. Whether stacked or placed in line, the four subwoofers pack powerful bass in any situation.

Audience size*: up to 500 people

System performance: 7,200 watts

Accessories

LINEAR 3 Cover

Linear 3 Cover

The custom-fit padded LINEAR 3 112 FA cover provides the necessary protection when transporting the speaker. The convenient handle recesses help to ensure comfortable and safe handling.

Stereo Pole Add-On (XLR)

Stereo Pole Add-On

The add-on set, especially for half-stack systems, consists of two height-adjustable König & Meyer M20 mounting poles, two high-quality XLR cables and a carrying bag.

Speaker Stand Add-On Package (XLR)

Speaker Stand Add-On Package

The ideal add-on for satellite or full-range speakers. The Speaker Stand Add-On Package includes two aluminium speaker stands and two XLR speaker cables. The set is rounded off with the convenient nylon carrying bag.

TB-45N

TB-45N

The TB-45N is a tilt bracket for mounting speaker cabinets on truss rods, ceilings, wall brackets, beams and on tripods. It is compatible with the F versions of the PREMIUM PR:O (including PR:O 115 XD2), LINEAR 3, LINEAR 5 and LINEAR 7 speaker series. Flexible vertical and horizontal alignment is possible.

The TB-45N can be loaded with up to 70 kg WLL, with a safety factor of 5. Under DGUV-V 17 (German Statutory Accident Insurance Association Regulation 17), the permissible load capacity is thus up to 35 kg.

Characteristics:

– Tilt bracket
– For mounting on truss rods, ceilings, wall brackets, beams and on tripods
– Made of high-strength steel
– Anti-corrosive coating
– Tool-free variable width adjustment
– Weight: 3.9 kg
– WLL: 70 kg / max. load capacity according to DGUV-V 17: 35 kg
– Supplied as a set, consisting of 2 x TB-45N

TB-45NQ

TB-45NQ

The TB-45NQ is a tilt bracket with quick-release pins for mounting speaker cabinets on truss rods, ceilings, wall brackets, beams and on tripods. It is compatible with the F versions of the LINEAR 3, LINEAR 5 and LINEAR 7 speaker series. Quick mounting on the box is guaranteed thanks to the ball lock pins. Flexible vertical and horizontal alignment is possible.

Characteristics:

– Tilt bracket with quick release pins
– For mounting on truss rods, ceilings, wall brackets, beams and on tripods
– Made of high-strength steel
– Anti-corrosive coating
– Tool-free variable width adjustment
– Weight: 3.95 kg
– WLL: 70 kg / max. load capacity according to DGUV-V 17: 35 kg
– Supplied as a set, consisting of 2 x TB-45NQ

Tilt-Unit

Tilt-Unit

To tilt the mid/high units when mounted directly on subwoofers, HK Audio offers the Tilt-Unit as an accessory which can be screwed into the M20 mount of the LINEAR SUB just like a mounting pole. This means that the DuoTilt™ can also be used at tilt angles of both -3° and -7° in a stack setup, and the Tilt-Unit prevents the mid/high units from slipping.

Downloads

Select category or search...

Product management

Music & Sales Professional Equipment GmbH
Wendelinuspark
Tritschlerstraße 3
66606 St. Wendel
Germany

Email: info@musicandsales.com

Service

Music & Sales Professional Equipment GmbH
Wendelinuspark
Tritschlerstraße 3
66606 St. Wendel
Germany

Email: service@musicandsales.com

Are you interested in an HK Audio product?

Use our dealer search to find a distributor and dealer near you.