Accessories – equipped for all situations
The optional accessories of the LINEAR 5 MK II series expand the application possibilities enormously and provide customized, high-quality and secure solutions.
Weather Protective Cover – The sound never stops, come rain, come sunshine
The Weather Protective Covers for all LINEAR 5 MK II mid/high units (except LINEAR 5 MK II 308 LTA and 118 Sub HPA) and subwoofers are precisely manufactured and equipped with many practical details. They are an optimal protection against moisture and wetness, at the same time a robust transport protection. Waterproof acoustic gauze protects the front of the speakers and drivers without affecting the sound. Depending on the model, the front flap can be easily and securely clipped to the side of the speaker or rolled up at the head end without interfering with stacking, clustering or cardioid setups.
On the backs, sturdy transparent viewing windows keep water out of electronics and provide access to controls and a cable entry. Handles remain usable with closable engagements or cut-aways. For the 115 XA, 112 FA and 115 FA mid/high units, this allows the rigging brackets to be installed even when the rain cover is on. The subwoofer covers provide lockable access to the thread for the spacer rods.
Tilt brackets – perfect alignment and easy handling for rigging operations.
TB-45N and TB-45NQ are tilt brackets made of high-strength steel for mounting speaker cabinets on truss spars, ceilings, wall brackets, beams and on tripods. The TB-45NQ are equipped with quick release pins for fast mounting. Both brackets have a maximum load capacity of 70 kg according to WLL and 35 kg according to DGUV-V 17. Simple and flexible vertical and horizontal alignment is possible.
RCS Rain Cover Set
The RCS Rain Cover Set supplied with the LINEAR 5 MK II 308 LTA and 118 Sub HPA reliably protects the electronics from rain, leaving all connections accessible and ensuring the controls are easy to read.
Accessories for cluster and headstack setups
The Headstack Extension Set is the extension of the TB-45N or TB-45NQ to accommodate a LINEAR 5 MK II 308 LTA headstack at the correct centre of gravity and tilt point. The TB-HES extends the sides of the TB-45 and connects to the headstack at the free screw points of the sliding plates of the LINEAR 5 MK II 308 LTA speakers.
The Pick Point (PP) and the Cluster Plate (CP) provide either two or three attachment points for rigging and angling the LINEAR 5 MK II 308 LTA. The following configurations can be built and rigged with just one set of the PP-CP. 2 x single use, 2 x headstack, 2 x cluster or 2 x headstack cluster. The PP-CP set is therefore a highly universal accessory and offers an unbeatable price/performance ratio
The DFP double flange plate is required when a cluster is to be stacked on a LINEAR 5 MK II 118 Sub HPA with mounting poles. This allows the cluster to be easily adjusted to the desired height with the mounting poles and aligned accordingly. The correct angle of the horizontal cluster is achieved by screwing the back of the 308 LTA onto the mounting poles or Tilt-Units.