Zum Inhalt Zum Hauptmenü

COSMO C 8

THE INTEGRATIVE LINE ARRAY

The COSMO C 8 has two 8" neodymium speakers with a horizontal dispersion of 80°. It is therefore ideally suited as a full-range line array for medium-sized events with required ranges of 30 meters and more. The medium-wide horizontal dispersion makes the C 8 highly versatile. Its asymmetrical sound distribution can be modularly adjusted by pairing it with C 6 and C 10 units, resulting in an almost perfect sound distribution.

ConceptPassive 2-way mid/high unit
Power handling RMS600 W
Max. SPL peak136 dB
Frequency range -6 dB63 Hz - 18 kHz
Dispersion angle -6 dB (horizontal x vertical)80° x 10°

technical data

Characteristics

ConceptPassive 2-way mid/high unit
Cabinet principleBass reflex
Power handling RMS600 W
Power handling program1200 W
Power handling peak2400 W
Nominal impedance18 Ohms
Max. SPL average2132 dB
Max. SPL peak3136 dB
Sensitivity 1 W/1 m4103 dB
Crossover frequency800 Hz
Frequency range -6 dB63 Hz - 18 kHz
Frequency range -10 dB57 Hz - 19 kHz
Dispersion angle -6 dB (horizontal x vertical)80° x 10°
Index
Index 1)According to EN 60268-5 (minimum value not less than 80% of nominal value)
Index 2)3 x unit @ 1 m, 10 % THD, 100 Hz - 5 kHz, (EN 60268-21), full space, @ 1.2 kW
Index 3)3 x unit @ 1 m, 10 % THD @ 2 kHz,full space, @ 1.2 kW
Index 4)100 Hz - 10 kHz, full space

Components

Mid/high frequency2 x 8" SICA cone speaker with neodymium magnet and 2.5"-voice coil
High frequency1 x 1.4" B&C compression driver with neodymium magnet and 3"-voice coil
CrossoverHigh pass: 18 dB/oct., Low pass: 18 dB/oct.
HornMCT-Horn

Connections

Input1 x NL4 Speakon
Output/parallel output1 x NL4 Speakon
Pin assignment1+/-, 2+/-, switchable

Amping/Presets

Lab.gruppenLake
PowersoftArmonia+

Mechanical data

Cabinet features/riggingRigging points 3-Point rigging hardware with black CDC coating
Carrying handles4 x integrated carrying handle
Cabinet materialBirch plywood
Cabinet surfacePU coating
ColorJet black (RAL 9005)
Front grilleSteel front grille with anticorrosive coating and backed acoustic foam
Dimensions (W x H x D), metric60.0 x 27.0 x 45.0 cm
Dimensions (W x H x D), imperial23-5/8 x 10-5/8 x 17-23/32 inch
Weight, metric22.8 kg
Weight, imperial50.3 lbs

Thanks to minimal distortion and a high sound pressure level, the COSMO delivers impressive results, even beyond its versatile field of application. When paired with subwoofers from the C SUB series, it really shows its strengths for rock and pop gigs. It requires no adapters and leaves no gaps when combined with C 6 and C 10 units, making the C 8 ideal as the center section of a mixed line array. All in all, considerably fewer components are needed than before to cover the full spectrum of what users need and expect from an FoH system. This extends the operating periods of each component compared to other system families. The uniform dimensions of the COSMO family simplify both storage and disposition, which has a positive impact on the warehousing in total. The line array is easy to handle, resulting in enormous time savings, as well as reduced training requirements. An existing system can be expanded precisely as needed, all of which means an effective investment protection is ensured. The expansion in small steps creates a much lower initial investment requirement.

Downloads

Certificates

DSP Presets

Manuals

Media

Datasheets

Simulation Data

Technical Drawings

Software